Shenzhen Hardware Tour

Field guide 03 · Pricing

Shenzhen Sourcing Agent Cost: What You Actually Pay For

Commission is the smallest number on the invoice and the one everybody argues about. Here is the full cost structure, the markups that hide inside a quote, and a five-line way to compare two agents.

Commission3–10% of goods
Small ordersFlat fee usually
Inspection$100–300 per day
Deposit30% to the factory

Two buyers can both say "5% commission" and end up 30% apart on landed cost. This page is the pricing side of hiring help in Shenzhen: what each fee model really covers, where the extra money hides, and how to compare two quotes without doing the maths twice.

The four fee models, and who they suit

Model What you pay Suits
Commission on order value Commonly 3–10% of goods value Repeat orders with a known supplier, clear product
Monthly retainer A few hundred to a couple of thousand USD a month Ongoing sourcing, several products, someone on call
Per-project fee Fixed price per job (a factory audit, a shipment inspection) One-off checks, or testing an agent before committing
Hourly / day rate Quoted per day on the ground Market visits, translation, short trips

A percentage looks cheapest and often is not: on a $1,750 sample order a 5% fee is only $87.50, which is less than the agent's taxi fares and phone calls. That is why small orders are usually quoted as a flat fee — commonly a few hundred dollars — or refused.

What is usually included, and what is not

Normally included: supplier search, price negotiation, sample coordination, order follow-up, booking the inspection, chasing the factory, sending you photos.

Normally extra: third-party inspection fees (roughly $100–300 a day), travel to factories outside Shenzhen, sample cost and sample shipping, consolidation and repacking, freight, duty, and translation of documents.

Often invisible: the exchange rate. If you pay in USD and the agent pays the factory in RMB, ask which rate they use. A rate 2% off the market is a 2% fee nobody called a fee.

Field note. Ask for one page listing what the fee covers and what triggers an extra charge. Agents who won't put it on one page are telling you something.

Three worked examples

Order Goods value Fee Fee per unit Where the rest goes
500 units @ $3.50 $1,750 5% → $87.50 $0.18 Freight and duty usually exceed the fee
5,000 units @ $3.50 $17,500 5% → $875 $0.18 Negotiate to 3–4% at this size
Custom item, tooling needed $40,000 5% → $2,000, or a retainer varies Tooling, moulds and certification are the big lines

Put your own numbers through the landed cost calculator — commission, freight, duty and payment fees in one place — before you argue over a percentage point.

Where the money actually hides

  1. Unit price markup. An agent who says "no commission" is usually buying at $3.20 and selling to you at $3.50. That is a 9% fee with a friendlier name. It is not automatically bad — just make it visible.
  2. Sample markup. Samples quoted at three times AliExpress price is a margin, not a shipping cost. Ask for the supplier's invoice on samples.
  3. Inspection add-ons. An inspection that is "arranged by the agent" can be a phone call to a friend. Ask for the inspection company's own report with photos and timestamps.
  4. Freight margin. Agents often book freight and add 10–20%. Compare with a quote you get yourself from one forwarder.
  5. FX spread. See above. Fix the rate for the order, in writing.

How to compare two quotes

Ask both agents for the same five numbers, and put them side by side:

Line Agent A Agent B
Goods value at the factory
Agent fee and its base
Sample cost, itemised
Inspection cost and provider
Freight quote and forwarder name

If one quote is dramatically lower, one of these four things is happening: the goods are cheaper because the spec is cheaper, the fee moved into the unit price, the freight is unbundled and will come later, or the scope is thinner. Ask which.

Payment terms worth insisting on

  • Deposit: 30% to the factory is standard; more than 50% on a first order is a warning.
  • Who receives the money: ideally the factory's company account, with the agent coordinating. If it must go through the agent, get an invoice and a contract.
  • Balance: after the inspection report, not before.
  • Currency: agree the rate and the date it is fixed.

When a sourcing agent is not worth the fee

Three clear cases: you already have a tested supplier; the order is under a few hundred dollars; or you are buying one-offs in Huaqiangbei yourself. In the third case, paying someone for a day in the market — translating, testing parts, telling you which building — costs a fraction of a commission and is usually the smarter first step. Read the Huaqiangbei guide if you are going in person.

The pricing checklist

  1. Get the fee base in writing: goods value only, or goods plus freight and duty.
  2. Get one page of inclusions and extras.
  3. Ask for the factory's own invoice on samples and goods.
  4. Fix the exchange rate in the contract.
  5. Put the inspection in your name, paid by you, report sent to you.
  6. Pay the deposit to the factory, balance after inspection.

Get these six right and the percentage matters far less than it seemed at the start.

Common questions

What is a normal sourcing agent commission in Shenzhen?

Commission commonly runs 3–10% of goods value, falling towards 3–4% on larger orders. Small first orders are usually quoted as a flat fee of a few hundred dollars, or refused.

What is not included in the agent fee?

Add inspection (roughly $100–300 a day for a third party), travel outside Shenzhen, sample cost and shipping, consolidation, freight and duty. Those lines usually total more than the commission itself.

How much does the fee add per unit?

It adds 5% of the goods value per unit at a 5% rate — about 18 cents on a $3.50 unit. The bigger per-unit costs are freight, duty and payment fees, which is why the landed cost matters more than the percentage.

Is it better if the agent takes no commission?

An agent buying at $3.20 and selling to you at $3.50 has charged about 9% while calling it "no commission". Not automatically wrong, but it should be visible — ask for the factory invoice.

How do I compare two agent quotes?

Compare goods value at the factory, the fee and its base, itemised sample cost, the inspection provider and the freight quote. If one quote is far lower, the spec, the scope or the freight is where the difference sits.